Metal Beam Crash Barrier (W beam & Thrie Beam)

Crash Barriers are provided to ensure high resistance in crash impact because of its flexible beam action. In this way it minimizes the speed of vehicle and also increases the driver confidence while riding through any critical area. It also increases visibility at night or in foggy conditions.

Our range of metal beam crash barriers consists of two variants W-Beam &Thrie Beam as per MORTH Clause 811.3 & IRC: SP: 84, IRC: SP:87, IRC: SP: 99 & IRC: 119 & IRC:5

It is qualified to crash testing ‘Road Restraint System’ as per European EN 1317-2 Standard & results are satisfactory as per the requirements of MORT&H Guideline: RW/NH-29023/02/2019-S&R (P&B), Dated :01st January,2020

Crash Barriers are provided to ensure high resistance in crash impact because of its flexible beam action. In this way it minimizes the speed of vehicle and also increases the driver confidence while riding through any critical area. It also increases visibility at night or in foggy conditions.

Our range of metal beam crash barriers consists of two variants W-Beam &Thrie Beam as per MORTH Clause 811.3 & IRC: SP: 84, IRC: SP:87, IRC: SP: 99 & IRC: 119 & IRC:5

It is qualified to crash testing ‘Road Restraint System’ as per European EN 1317-2 Standard & results are satisfactory as per the requirements of MORT&H Guideline: RW/NH-29023/02/2019-S&R (P&B), Dated :01st January,2020

Metal Beam Crash Barriers are manufactured by using the Cold Roll Forming Technology with multiple roll forming stations. This enables us to achieve our productivity and targets on regular basis along with greater quality and accuracy.
W-Beam Structural Elements:
Process Methods: Cold Roll Forming, Piericing, Shearing, Profile Bending, Hot Dip Galvanizing

Sizes/Ranges:

• W-Beam - L 4318 x W 312 x H 81 x T 2.50 to 3.0 mm
• End Section - L 736 x W 312 x H 81 x T 2.50 to 3.0 mm
• Post - L 1100 to 1800 x W 150 x H 75 x T 4.50 to 5.0 mm
• Spacer - L 330 to 360 x W 150 x H 75 x T 4.50 to 5.0 mm
• Bolts & Nuts (Hex/Button head) - M16 x P 2.5 x L 40m

Raw Materials Specifications:

• W-Beam/End Section - HR Sheet T 2.50 to 3.0 mm as per IS:1079 HR3 / IS:2062  E-250 A
• Post & Spacer - HR Sheet T 4.50 to 5.0 mm as per IS:2062 E-250 A
• Bolts & Nuts (Hex/Button head) - M16 as per IS:1367 / 136

Surface Finishing: Hot Dip Galvanized (550 g/m²) - As per IS:2629

Note: Specification of raw materials and surface finishing can be customized to client's needs.

Thrie-Beam Structural Elements:

Process Methods: Cold Roll Forming, Piericing, Shearing, Profile Bending, Hot Dip Galvanizing

Sizes/Ranges:

• Thrie-Beam - L 4318 x W 502 x H 81 x T 2.50 to 3.0 mm
• End Section - L 760 x W 502 x H 81 x T 2.50 to 3.0 mm
• Post - L 2000 to 2100 x W 150 x H 75 x T 4.50 to 5.0 mm
• Spacer - L 550 x W 150 x H 75 x T 4.50 to 5.0 mm
• Bolts & Nuts (Hex/Button head) - M16 x P 2.5 x L 40mm

Raw Materials Specifications:

• Thrie Beam/End Section - HR Sheet T 2.50 to 3.0 mm as per IS:1079 HR3 / IS:2062  E-250 A
• Post & Spacer - HR Sheet T 4.50 to 5.0 mm as per IS:2062 E-250 A
• Bolts & Nuts (Hex/Button head) - M16 as per IS:1367 / 1364

Surface Finishing: Hot Dip Galvanized (550 g/m²) - As per IS:2629